The size of the inlet opening 900 x 600 mm. 

Modifications:

CitySkid   960V3 (front)

CitySkid 960V4 (diesel-electric)

Additional options:

Installation of the magnet

Lateral conveyor

Magic Eye Feed control : the device inside the crusher, which automatically monitors the feeder

Wolffs Leg Stand for loading the machine with no front-end loader crane

Specifications:

-            hopper 5 meter cube.

-            hopper size 4.800 mm x 2.300 mm

-            Vibrating Feeder 650x 4.000 mm with a primary grizzly 60 mm

-            controlled by two eccentric motors x 1.2 KW

-            coating hopper and feeder Hardox 6 mm

Disintegrating site:

-            the size of the inlet opening 900 x 600 mm

-            capacity 65 - 140 tonnes per hour depending on how CSS and material

-            valid CSS from 40 mm to 140 mm and operates the manual hydraulic pump

-            crusher speed 270 rpm.

An electric motor 75 KW - 1,475 rpm with Remneva drive   and security system.

Control Panel:

-            2 panels, with protection from fur. damage and rain

-            main switch, emergency stop button and alarm button front

-            Management: feeder, crusher discharge conveyor, magnet

-           the frequency of the control panel for setting speed options feeder.                        

Discharge conveyor , 1000 mm   x 8000 mm, folding manual.

-            folding mechanism is placed behind the magnet, which allows the magnet to remain in the operating position during transport

-            EP 400, 4:2 coat drive drum diameter 315 mm, covered with a layer of rubber

-            the height of the conveyor 3460 mm

-            7.5 KW electric drive tension.

Welded Chassis:

-            full compliance with the specification of DIN .

-            height during transport on a low trailer is 3200 mm

-            width for transportation on a low trailer is 2.500 mm

-            Conveying length 12 000 mm

-            Working height 3800 mm

-            working length 12 000 mm

-            working width 2500 mm

-            the total weight of 24,520 kg, including a magnet and a diesel generator.

            Magnet:

-            located above the discharge conveyor, it remains in position during transportation,

-            power 400 Gauss at a distance of 250 mm to 1000 mm from the top of the conveyor,

-            chevron belt width 750 mm, the driving drum and rear drum

-            the tension and drive motor.

            Discharge Conveyor:

-            for loading pre-sifted material, width 700 mm, 3000 mm length.

            Magic eye level inside the crusher device that automatically controls the work of the feeder.

-            comes as an addition to the manual system, starting and stopping,

-            control of the load level grinders, starting and stopping   with the feeder relay settings

-            Installation in control panel and wiring

            Diesel generator

-           150 kVA / 120 KW , 400/231 Volt , 50 Hz ,

-            Engine : John Deere 6068 T 762, 4 cylinder , 1.500 t / min;

-            generator Leroy Somer , 150 KVA ; jack connection with the control panel

-           set to CitySkid 960 V 4.

            Wheels and telescopic support

-            means for transporting the crusher front-end loader

-            maximum speed of 5 km / h on a flat surface,

-            maximum load on each wheel 8 ton,

-            transport height with wheels: 3.35 m

-            transport width with wheels: 2,70 m

-            adaptation to Wolff ' s Leg loading without the crane (see Wolff ' s Leg )

-            pre-shipment check rates Loader

            Wolff ` s Leg                                                    

-            support for:

            a ) move CitySkid on a transport platform without a crane,   wheel loader

            b ) raising the rear of the machine on wheels and telescoping supports.

Weight   setting:

basic model:    960V3: 21.800 kg

                               960V4: 23.300 kg

Magnetic conveyor:  700 kg

Side conveyor:      600 kg

Warranty: 12 months or 2000 meter (which factor comes first).