Company CITYEQUIP offers a range of mobile jaw crushers, electric and diesel-electric drive. Crusher designed to crush concrete, rocks, construction debris, etc.  

 The size of the inlet opening  crushing site 700 x 500 mm. 

Basic equipment includes a hopper with a grate separator, crushing unit, power unit, discharge conveyor and a frame.

 Additional options:

- Magnetic separator;

- Lateral pipeline;

- Remote control ;

- Dust suppression system .

 Hopper:

-            hopper size 3.500 mm x 2.000 mm

-            Vibrating Feeder 650 mm x 3.000 mm with a primary grizzly 60 mm

-            controlled by two eccentric motors x 1.0 KW

-            coating hopper and feeder Hardox 6 mm

 Jaw Crusher (crushing unit):

-            the size of the inlet opening 700 x 500 mm

-            capacity 45 - 130 tons / hour depending on the configuration of CSS and material

-            adjustment range CSS (discharge gap) of 30 mm to 140 mm and adjustable hydraulic hand pump

-           magic

-            speed mobile cheeks - 340 rpm.

An electric motor 37 kw - 1475 rpm. with Remneva drive   and protections.

Control Panel:

-            control panel with protection from fur. damage and moisture

-            main switch, emergency stop button and alarm button front

-            Management: feeder, crusher discharge conveyor and magnetic separator.

Discharge conveyor , width 800 mm, formed by hand.

-            folding mechanism is placed behind the magnet, which allows the magnet to remain in the operating position during transport

-            EP 400, 4:2 coat drive drum diameter 315 mm, covered with a layer of rubber

-            conveyor discharge height 2800 mm.

Welded Chassis:

-            full compliance with the specification of DIN .

-            height during transport on a low trailer is 3100 mm

-            width for transportation on a low trailer is 2 554 mm

-            Conveying length 8500 mm

-            Working height 3100 mm

-            Working length   9900 mm

-            working width 2554 mm

 Magnet:

-            located above the discharge conveyor, it remains in position during transportation,

-            power 400 Gauss at a distance of 250 mm to 1000 mm from the top of the conveyor,

-            chevron belt width 750 mm, the driving drum and rear drum

-            the tension and drive motor.

 Discharge Conveyor:

-            for loading pre-sifted material, width 800 mm,

-           discharge height 2800 mm.

 Frequency of the control panel:

-            to adjust the speed options feeder.

 Magic eye level inside the crusher device that automatically controls the work of the feeder

-            comes as an addition to the manual system, starting and stopping,

-            control of the load level grinders, starting and stopping   with the feeder relay settings

-            Installation in control panel and wiring

 Diesel generator

-           100 kVA / 120 KW , 220-400 Volt , 50 Hz ,

-            Engine Cooling: John Deere 4045 Dieselmotor type HFS 73, 103 KW at 1.500 rpm.,

-            generator Leroy Somer , 100 KVA ; jack connection with the control panel

-           set to CitySkid 9 V 4.

Wheels and telescopic support

-            means for transporting the crusher front-end loader

-            maximum speed of 5 km / h on a flat surface,

-            maximum load on each wheel 8 ton,

-            transport height with wheels: 3.11 m

-            transport width with wheels: 2,50 m

-            pre-shipment check rates Loader

 -            Machine weight standard:   18,500 kg

Lateral conveyor: 550 kg

       Warranty: 12 months or 2000 meter (which factor comes first).