Sandvik UJ310

Sandvik UJ310

General information

Comfort type
• The feeder has adjustable grizzly section formed by fabricated Hardox / Mn-Steel bars. The
nominal gap is adjustable from 60 up to 90 mm. It has a wire cloth screening element
beneath the grizzly (958 mm wide x 850mm long), to remove the natural fines.
• The crusher by-pass chute collects material, which passes through the vibrating feeder's grizzly
section. A manual deflecting flap allows three possibilities:
o Directs the intermediate and fine fractions to the delivery conveyor beneath the
crusher.
o Directs the intermediate and fine fractions to a separate fines stockpiling conveyor.
o Permits the removal of fine material (taken out by a separate stockpiling conveyor) and
allows the intermediate fraction to follow with the crusher product on the delivery
conveyor.
• The operator's platform has handrails and access ladder from the ground. Safety guards are fitted to
drives and around the crusher's flywheels.
• Easy and quick displacement between job sites.
• Compact design & easy access to all equipment.
• All the feed, discharge and connection chutes are robust constructions, made of steel plate with
liner.
• An Electric switchgear panel IP54 (protection class) is wired on board. The free- standing control
panel cabinet is placed on the ground during operation.
• Local control push button on the operator’s platform for local control of the feeder.
• The UJ310 Plant is designed to produce up to 325 MTPH of normal quarried stone at 125 mm (5”)
C.S.S. (Close Side Setting).

Dimension
Operation
Height 5.06 m
Width 4.25 m
Length 15.08 m
Transport
Height 4,00 m
Width 2,64 m
Length 15.08 m

tons 50 t
short tons
1 excluding options

Feeder type: GF-410100, with 1.3 m long bar
grizzly
Drive system: Dual Invicta unbalanced motors –
6.63 kW / 50Hz / 1000 rpm
Feed Hopper: 17 m3

Type Sandvik CJ411 Jaw Crusher
MotorElectric, 110 kW, 1000rpm, Squirrle-cage type

Belt 8.1 m x 1000mm
Driven system 11.0 kW electric motor

All electric, intended for connection to a main supply.
Total Power: 134.0 kW
Supply voltage: 415 V/50 Hz/3-phase AC
Control voltage: 220 V/50 Hz/1-phase AC

2” King-pin, Leaf-sprung double-axle bogie, with airbrakes
and running lights. 10”x20” – 16 ply.

Feed opening: 1044 x 838 mm
Capacity (up to) 325 mtph